STP and RSTP Guide

A VLAN creates a separate broadcast domain; routing and access policies govern communication between VLANs. Review trunk allowed lists, access-port assignment and gateway placement together. A network diagram should show where packets are routed and filtered, not merely which cables connect devices. Sharing a switch does not require sharing privileges. When access fails, confirm VLAN and addressing first, then gateway, route and policy matching.

MTU concerns packet size on a link; tunnelling and encapsulation headers can reduce space available for useful payload. Small requests working while large transfers stall may suggest an MTU issue, but this is not proof. TCP MSS and interface MTU are distinct. Compare both endpoints and tunnel interfaces. Identify the affected segment with controlled tests instead of changing every device, and remember that blocked ICMP error messages can complicate path-MTU discovery.

DNS results depend on client and recursive-resolver caches as well as authoritative data. Changing a TTL does not retroactively shorten already cached answers. A/AAAA, CNAME, MX and TXT records serve different purposes. Test internal and external views separately; split DNS may intentionally return different results. Record resolver, response type, TTL and query time when troubleshooting. Successful access by IP address alone does not prove correct DNS configuration.

Latency is the time between starting an operation and receiving its result. An average can hide a small number of very slow operations; medians and p95/p99 percentiles answer different questions. Network RTT, storage waits, processor queues and application processing contribute to end-to-end time. State whether measurements come from the client or server. Check whether increases coincide with traffic growth, maintenance or capacity limits. Record normal and peak-hour baselines before selecting an alert threshold.

Link capacity differs from useful application throughput. Protocol headers, encryption, retransmissions, small files and storage waits reduce net transfer speed. Keep bits and bytes distinct: 1 Gbit/s corresponds to a theoretical 125 MB/s, not an application performance guarantee. Estimate transfer time as data size divided by measured useful throughput. Observe the network, source reads and destination writes together to locate the bottleneck. Consider temporary slowdowns and competing workloads as well as average speed.

Telemetry combines logs, metrics and events that explain system behavior. A log describes an event, a metric shows behavior over time, and a distributed trace follows a request across components. Clock differences can make one event appear to occur at several times. Use synchronized clocks, reliable source identifiers and consistent time-zone handling. Alarm design should consider duration and user impact alongside thresholds. Monitor gaps in collection separately: absence of logs must not be interpreted as absence of incidents.